How to Connect a Water Line to a Kenmore Elite Refrigerator

About an hour for each install Anyone who has had to crawl into a kitchen cabinet to change a water faucet and supply lines can attest to the fact that it is one of the harder things to do. Cramped for space and limited in your movements, you have to reach over your head in a confined area and attempt to loosen the supply lines, loosen the corroded nuts that hold in the fixture, and then ensure that nothing leaks when you’re done. Running a line for this component is relatively easy for the average DIYer. Step 1 — Drill an Access Hole for the Line Check the basement directly underneath the refrigerator for an available cold water supply line and determine where the hole must be drilled for the water line. Drill the access hole. Do this carefully to ensure you do not drill into a baseboard or too far into the room—the hole must be under the refrigerator. If possible, drill the hole from the top down to ensure correct placement. Try tapping the floor to find the hollow sound between the floor joists for a good place to drill a hole.

How to Connect a Water Line to a Kenmore Elite Refrigerator

There is always a nice feeling of accomplishment that a homeowner can enjoy when you hook up your faucet water filter system to give you an endless supply of pure, clean, and good-tasting filtered water. Since tap water that goes through a quality water filtration system is even better water than what you can buy at the store, you may be able to pay for that water filter system pretty quickly by simply not having to buy bottled water any more.

That joy and sense of accomplishment may be diminished when you step back and watch how your family gets cold water to drink on a regular basis. If they routinely draw their drinking water from the faucet that is in the door of the refrigerator, you may suddenly realize that your shiny new faucet water filtration system is not enough.

You should also consider whether adding a refrigerator water filter is in order. If the water that comes into the refrigerator through a separate line is not being filtered correctly, your efforts to assure healthy drinking water for your family might be coming undone when they put ice that is full of contaminants in their water.

I forgot to mention it in my orginal posting but the fridge is across the room from the nearest water source. It is a span of about 6 ft (directly across) from the kitchen sink.

I had the totally opposite experience happen yesterday. I bought another LG refrigerator to replace it. This one is slightly larger but still will fit through the door with the handles taken off. The one that I currently have had to have the handles taken off to get it in the house as well. The delivery guy arrives yesterday and immediately has an attitude.

He’s saying how it isn’t going to fit, didn’t the salesman explain to me how to measure like I’d be too stupid to understand how to measure on my own , they can’t get it in, etc. I asked him what he meant because it surely would fit in the door. I told him I had measured and it fits, he has to take the handles off. He goes into how they aren’t allowed to take handles or doors off. I said that was rediculous, refridgerators won’t fit without it, there are instructions with the manual that say how to both take off the handles and the doors.

I again said I didn’t believe that. He said it was a “new policy”.

How to Connect a Refrigerator Water and Ice Dispenser

I have seen many valves have a hairline crack in the actual blue plastic housing, at a mold injection seam, where the plastic meets the metal portion of the valve, out the top of the solenoid housing, the part of the valve that looks like one half of a snap button on a pair of old jeans. If your leak is anywhere BUT precisely at the inlet connection, you need a new valve. If your leak is indeed at that connection, check a couple of things.

First, turn the water off after you determine source of leak. If its copper you are using, which is much better than plastic btw, major drawback is that it can kink, but major plus is its much more durable than plastic..

Mar 21,  · Discuss Side by Side Water Hook Up for Icemaker in Refrigerator & Freezer Repair. “I found and installed the icemaker for this unit for my Dad after years of not having one since installation.

The water main line is one of the most important parts of your home – this is the source of water for your entire house. Although it is possible to install a main line on your own, it is definitely recommended to hire a professional due to the difficulty and importance of the project. The plumber or contractor will also need to restore the area after the pipe is installed, which includes filling in the hole and restoring landscaping or anything else in the area.

Enhancement and improvement costs If your plumbing is old and no longer in code, you may need to replace the piece that connects the city pipe to your private pipe, known as the tap. Additional considerations and costs Copper pipes are the more popular option and are especially good for cold climates, but they are more expensive. PVC pipes are much less expensive but are lower quality. Installing a main water line almost always requires permits and city approval.

In some areas, these permits may be more expensive and can add extra costs to your project. Talk to your plumber for local details.

Water Line Connection For A Refrigerator Icemaker

We are at the tail end of the remodel, finally, and needed to install a water line from the sink plumbing to the refrigerator for the ice maker. This is such an easy process and so I created a tutorial on how to install a refrigerator water line. The instructions apply to replacing an existing water line, as well.

Refrigerator Water Supply Most modern refrigerators include filtered water and an ice dispenser. For that to work, the refrigerator is equipped with a flexible, 1/4″ water supply line on the backside.

PEX looks like plastic but isn’t or copper behind the wall, terminating at a shutoff valve. Then from the shutoff valve to refrigerator you can use the plastic or braided line that came with the refrigerator. You don’t want a pan under the refrigerator because you need to be able to roll it out so you can clean behind it and periodically clean the refrigerator coils. Here is a link to more “Ice Maker Outlet boxes” http: You do not want that in the walls.

The days of just laying pipe out the wall for the refrigerator is out dated and more prone to leaks. Behind the walls it must be PEX or copper and a wall box with a value. The delivery guys were probably looking for this type of connection but in older homes there be an in line shut off valve. Either way for the hook up there be a threaded connection or a compression fitting.

From the picture the recessed box looks like an electrical box but I’m not sure. For a remodel only settle for an outlet box as shone at this Home Depot link and PEX or copper behind the wall. My son bought a house that had a remolded kitchen a few years old.

How do I hook up the water line to my refrigerator

If a small adjustment is needed from above, attach the nut to the refrigerator valve. Helped me change mine out quickly and easily. Braided tubing is a very strong and durable product that will not cut easily; the latest water valves have a very simple installation a new style push on fittings for water outlet line and a screw on compression for the water inlet fitting. As in step 1, this tube needs tube inserts on both ends. Then after a half hour, and check whether the water dispenser is still doing its thing.

Jun 06,  · Planning on installing a water line for a new refrigerator by branching off a copper water line in the exposed ceiling of our basement and bringing the new line up behind the refrigerator.

Refill time 1minute maximum to reduce water use and avoid a valve stuckopen condition from. Some machines use 12 volts DC, in which case instead of an aquarium pump, youll need to look for a suitable submersible 12 volt DC pond pump or submersible nonautomatic boat bilge pump. You can also use a datalogging voltmeter that. Cut the tube off, inside of the crimp, using a tubing cutter to get a clean, square cut.

Bin fills up with water or drains slowly: You can reach in to feel the plate surface with your fingertips to observe the very beginning of the ice formation; it can be hard to see the clear ice when it first forms under the sheet of flowing water. Offset to the thickness control.

Connecting ice maker to a PVC water line : DIY

Depends on the type s of iron, how much of it there is, whether you have turbidity issues, and the Ph of the water. Only a comprehensive test can determine this. See the link below and notice the explanation concerning the various types of iron and what’s required to remove them. Frequently a chlorinator is essential, but not always. However, you could have other issues as well that can also be resolved with the use of chlorinator.

There are new much lower limits in place for acceptable arsenic levels, but don’t panic if the test shows “high” arsenic levels.

Jul 12,  · But, tapping into the hot water line to freeze faster also won’t work just because its hot. Since the water in the water line will cool off to room temp while the maker is making ice, and either way, most of the time you end up with room temp water going into it.

Blog see what our customers are saying Our Central Air unit was not working this spring , Superior was awesome. They responded quickly… within a few hours of our call to help us diagnose the problem. Chad was extremely professional and respectful. Our favorite thing about him was his cheerful attitude and his willingness to find the problem, and he went the extra mile- making sure there were no other problems.

This company has earned our 5-star rating. My experience today with Superior Water and Air was amazing. Not only did Martin Alvarado take care of my leaking water softener, but he also offered to do things that he did not have to do. He was so courteous and kind.

How To Install a Water Line to your Fridge